Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100252 A03 I General requirements.

Inspection Nr: 1602216.015

Citation: 02001

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $29,005.00

Current Penalty: $18,065.00

Issuance Date: 12/13/2022

Nr Instances: 1

Nr Exposed: 2

Abatement Date: 12/19/2022

Gravity: 10

Report ID: 0213900

Contest Date: 12/19/2022

Final Order: 03/04/2024

Related Event Code (REC): A

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty J: ALJ Decision 03/04/2024 $18,065.00 12/19/2022 Serious  
Penalty C: Contested 01/20/2023 $29,005.00 12/19/2022 Willful  
Penalty Z: Issued 12/13/2022 $29,005.00 12/19/2022 Willful  

Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present: a) Workplace - 413 Swedesboro Road, Mullica Hill, NJ 08062: Workers welded on a tanker truck that contained fuel including diesel that was possibly mixed with gasoline. The tanker truck was not adequately cleaned to remove the fuel and vapor. Violation occurred on or about June 15, 2022. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close