Translate
Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1547420.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $67,582.00
Current Penalty: $50,000.00
Issuance Date: 12/08/2021
Nr Instances: 5
Nr Exposed: 20
Abatement Date: 12/28/2021
Gravity: 10
Report ID: 0418600
Contest Date:
Final Order: 01/04/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/04/2022 | $50,000.00 | 12/28/2021 | Repeat | |
| Penalty | Z: Issued | 12/08/2021 | $67,582.00 | 12/28/2021 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.305(b)(1)(i):Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions and/or opening openings through which conductors enter where not effectively closed: a) Line 1 conveyor line out feed conveyor side : On or about August 10, 2021 and at times prior, the employer exposed employees to electrical burns, shock and fire hazards from a 120 V (20 amp) electrical circuit entering an electrical box that was not effectively closed. b) Line 1 beginning area above conveyors : On or about August 10, 2021 and at times prior, the employer exposed employees to electrical burns, shock and fire hazards from a 120 V (20 amp) electrical circuit entering an electrical box that was not effectively closed. c) Line 1 conveyor line motor stops switch : On or about August 10, 2021 and at times prior, the employer exposed employees to electrical burns, shock and fire hazards from a 120 V (20 amp) electrical circuit entering an electrical box that was not protected from abrasion. d) Line 2 corkscrew separator junction box : On or about August 10, 2021 and at times prior, the employer exposed employees to electrical burns, shock and fire hazards from a 120 V (20 amp) electrical circuit entering an electrical box that was not protected from abrasion. e) Line 2 conveyor out feed from boxing : On or about August 10, 2021 and at times prior, the employer exposed employees to electrical burns, shock and fire hazards from a 120 V (20 amp) electrical circuit entering an electrical box that was not protected from abrasion. iSpice Foods Inc. was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1500305, citation number 2, item number 3 and was affirmed as a final order on 5/12/2021, with respect to a workplace located at 6450 US 43 Jackson, AL 36545. iSpice Foods Inc. was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1302493, citation number 2, item number 3 and was affirmed as a final order on 7/18/2018, with respect to a workplace located at 6450 US 43 Jackson, AL 36545.