Violation Detail
Standard Cited: 19100147 C05 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1456731.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $74,217.00
Current Penalty: $52,029.83
Issuance Date: 07/06/2020
Nr Instances: 3
Nr Exposed: 25
Abatement Date: 07/30/2020
Gravity: 10
Report ID: 0524200
Contest Date: 07/29/2020
Final Order: 04/12/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/12/2021 | $52,029.83 | 07/30/2020 | Repeat | |
| Penalty | C: Contested | 09/14/2020 | $74,217.00 | 07/30/2020 | Repeat | |
| Penalty | Z: Issued | 07/06/2020 | $74,217.00 | 07/30/2020 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: The employer does not provide devices and hardware necessary for isolating, securing, or blocking of machines or equipment from hazardous sources of energy. This violation was most recently documented at the address located above, as follows: a) Production Area - On or about January 22, 2020, January 23, 2020, and January 29, 2020, the employer failed to ensure that an adequate number of locks were provided to employees for use during lockout tagout while performing work on equipment such as the Mogul 5 Stacker, Mogul 5 Feeder, Mogul 5, Mogul 7 Starchbuck and Mogul 7 Depositor. b) Production Area - On or about January 22, 2020, and January 23, 2020, the employer failed to ensure that protective hardware, such as blocks, were provided to employees for use during lockout tagout to isolate the potential movement hazards on the Mogul 5 Tanis Robot when performing work within the Mogul 5 Feeder and Stacker. c) Production Area - On or about January 29, 2020, the employer failed to ensure that protective hardware, such as ball valve covers, were provided to employees for use during lockout tagout to isolate the steam, hot water and pneumatic energy on the Mogul 5 and Mogul 7. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. Ferrara Candy Company was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.147(c)(5)(i), which was contained in OSHA inspection number 1318823, citation number 2, item number 2, and was affirmed as a final order on December 14, 2018, with respect to a workplace located at 7301 Harrison St., in Forest Park, Illinois.
Translate