Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Courtyard Area- On or about July 5, 2018, the employer failed to conduct periodic inspections of each energy control procedure at least annually to verify the procedures were adequate and were being applied properly. This would include an inspection of the machine specific procedures for the Glue and Roll Coat Lines Oxidizer 1097. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. BorgWarner Emissions Systems LLC was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, 29 CFR 1910.147(c)(6)(i), which was contained in OSHA Inspection Number 1117476, Citation 2, Item 1, and was affirmed as a final order on April 11, 2016, with respect to a workplace at 600 Highway 32 East in Water Valley, Mississippi. BorgWarner, Inc. was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, 29 CFR 1910.147(c)(6)(i), which was contained in OSHA Inspection Number 1126641, Citation 1, Item 1, and was affirmed as a final order on April 11, 2016, with respect to a workplace at 214 Fellowship Road in Taylorsville, Mississippi.