Translate
Violation Detail
Standard Cited: 19260404 B01 III C Wiring design and protection.
Inspection Nr: 1271455.015
Citation: 02001
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/18/2017
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity:
Report ID: 0418800
Contest Date: 01/18/2018
Final Order: 05/14/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 05/14/2018 | $0.00 | Other | ||
| Penalty | C: Contested | 01/23/2018 | $0.00 | Other | ||
| Penalty | Z: Issued | 12/18/2017 | $0.00 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1926.404(b)(1)(iii)(C): Where an assured equipment grounding conductor program was being utilized, the employer did not ensure that each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, were not visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage: On or about 10/12/2017, at the above addressed worksite, a portable hydraulic punch press (i.e. Valpower, Model #VEP075I-PM-CSI) was not visually inspected before use for external defects, exposing an employee to an electrical hazard.