Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1257654.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Corrected During Inspection
Initial Penalty: $69,713.00
Current Penalty: $0.00
Issuance Date: 10/06/2017
Nr Instances: 1
Nr Exposed: 33
Abatement Date:
Gravity: 10
Report ID: 0522000
Contest Date: 11/03/2017
Final Order: 11/02/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 11/02/2018 | $0.00 | Repeat | ||
| Penalty | C: Contested | 11/03/2017 | $69,713.00 | Repeat | ||
| Penalty | Z: Issued | 10/06/2017 | $69,713.00 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes. On August 18, 2017, in the Dryer Room, a maintenance employee was exposed to an amputation hazard when reaching underneath an inadequately guarded pulley and belt located on Centerfuge Dryer Deck #5, Dryer #8 motor, approximately 18 inches off the ground. Dole Fresh Vegetables, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, which was contained in OSHA inspection number 110715, citation number 1, item number 1 and was affirmed as a final order on December 22, 2016, with respect to a workplace located at 600 Benjamin Drive, Springfield, OH.