Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. On or about March 21, 2017, a. In the manufacturing area where employees were exposed to struck-by and caught-by hazards when operating MORI SEIKI SL-25B with machine ID# L12 without a functioning door interlock. b. In the manufacturing area where employees were exposed to struck-by and caught-by hazards when operating a DAEWOO Puma 15 with serial number PM150169 without a without a functioning door interlock. c. In the manufacturing area where employees were exposed to struck-by and caught-by hazards when operating a TAKISAWA TC-3 with serial number THUAR-2804 without a without a functioning door interlock. d. In the manufacturing area where employees were exposed to struck-by and caught-by hazards when operating a OKK VM5-2 with serial number 1352 without a without a functioning door interlock. e. In the manufacturing area where employees were exposed to struck-by and caught-by hazards when operating a YAMA SEIKI VMB-1100 with serial number 4066 without a without a functioning door interlock. DIMENSIONAL MACHINE WORKS, LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD 29 CFR 1910.212(a)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 982138 CITATION NUMBER 2, ITEM NUMBER 2 AND WAS AFFIRMED AS A FINAL ORDER ON 8/26/2014, WITH RESPECT TO A WORKPLACE LOCATED AT 6930 SAN ANTONIO ST, HOUSTON, TEXAS 77040.