Translate
Violation Detail
Standard Cited: 19100147 C04 II B The control of hazardous energy (lockout/tagout).
Inspection Nr: 1192347.015
Citation: 02001
Citation Type: Other
Abatement Date: 06/16/2017 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/27/2017
Nr Instances: 8
Nr Exposed: 3
Related Event Code (REC):
Gravity:
Report ID: 0729700
Contest Date:
Final Order: 03/23/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/23/2017 | $0.00 | 06/16/2017 | Other | |
| Penalty | Z: Issued | 02/27/2017 | $0.00 | 04/13/2017 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: The employer is failing to protect employees from amputation and struck-by hazards. This was most recently documented on 11/17/16 at a establishment located at 15 SW. 40 Ave in Great Bend KS; in that specific energy control procedures did not identify the specific energy control devices needed to isolate all sources of energy: a) 2 ton hoist maintenance shop b) F2-impco 1&2 in the plastics area c) All Cincinnati injection molds (F5, F6, F14, F15, F16) in the plastics area d) All plastics grinders in the plastics area e) Chiller in the plastics room f) F3-Bekum in the plastics area g) F7 in the silk screen room h) F8 Portlite(s) in the plastics area i) F17 Impco 350T in the plastics area j) F18 silkscreen stamp 5 gallon in the plastics area k) Loveshaw box folder in the plastics area