Translate
Violation Detail
Standard Cited: 19100216 F02 Mills and calenders in the rubber and plastics industries.
Inspection Nr: 1185610.015
Citation: 02001
Citation Type: Repeat
Abatement Date: 04/15/2017 2
Initial Penalty: $11,154.00
Current Penalty: $7,000.00
Issuance Date: 02/16/2017
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): A;R
Gravity: 10
Report ID: 0523400
Contest Date:
Final Order: 03/08/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/08/2017 | $7,000.00 | 04/15/2017 | Repeat | |
| Penalty | Z: Issued | 02/16/2017 | $11,154.00 | 03/15/2017 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.216(f)(2): Stopping limits for mills. All mills irrespective of the size of the rolls or their arrangement (individually or group-driven) did not stop within a distance, as measured in inches of surface travel, not greater than 1 1/2 percent of the peripheral no-load surface speeds of the respective rolls as determined in feet per minute: (a) The Farrell rubber mill stopped approximately 22 seconds after the emergency safety device (trip rod) was activated and the front roller traveled approximately 13 feet which was more than the 16 inches allowed. The Linear Rubber Products, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 1910.216(f)(2), which was contained in OSHA inspection number 107544, citation number one (1), item number eight (8) and was affirmed as a final order on March 1, 2012, with respect to a workplace located at 5416 46th St., Kenosha WI 53144.