Translate
Violation Detail
Standard Cited: 19100147 C04 II B The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1154957.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Corrected During Inspection
Initial Penalty: $68,591.00
Current Penalty: $0.00
Issuance Date: 11/23/2016
Nr Instances: 1
Nr Exposed: 9
Abatement Date:
Gravity: 10
Report ID: 0522300
Contest Date: 12/19/2016
Final Order: 12/14/2017
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/14/2017 | $0.00 | Repeat | ||
| Penalty | C: Contested | 12/20/2016 | $68,591.00 | Repeat | ||
| Penalty | Z: Issued | 11/23/2016 | $68,591.00 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: On or about June 8, 2016, the employer failed to ensure the written lockout/tagout procedures on MOH 1203 Tilt Mold Table and MOH 289 Hydraulics Motors identified all sources of energy. Employees were exposed to gravity converted to kinetic energy when a safety bar was not utilized to stop the mold plates from closing during Mold Prep. Park Ohio Products Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(4)(ii)(B), which was contained in OSHA inspection number 457493, citation number 01, item number 001 and was affirmed as a final order on August 21, 2012, with respect to a workplace located at 7000 Denison Avenue, Cleveland, Ohio 44102.