Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1116028.015
Citation: 02001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $70,000.00
Current Penalty: $70,000.00
Issuance Date: 06/17/2016
Nr Instances: 1
Nr Exposed: 71
Abatement Date: 02/23/2017
Gravity: 10
Report ID: 0636900
Contest Date: 07/08/2016
Final Order: 01/23/2017
Related Event Code (REC): A;R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 01/23/2017 | $70,000.00 | 02/23/2017 | Serious | |
| Penalty | C: Contested | 07/14/2016 | $70,000.00 | 07/25/2016 | Willful | |
| Penalty | Z: Issued | 06/17/2016 | $70,000.00 | 07/25/2016 | Willful |
Text For Citation: 02 Item/Group: 001 Hazard:
2-1 Type of Violation: Serious Penalty Amount: $11,666.67 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the facility in the maintenance shops, employees operating and/or performing deburring operations on lathes were exposed to struck by, caught-in and amputation hazards. The following lathe did not have point of operation guarding: LeBlond lathe 19" located in Back maintenance shop. 2-2 Type of Violation: Serious Penalty Amount: $11,666.67 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the facility in the maintenance shops, employees operating and/or performing deburring operations on lathes were exposed to struck by, caught-in and amputation hazards. The following lathe did not have point of operation guarding: Summit lathe 17" located in Back maintenance shop. 2-3 Type of Violation: Serious Penalty Amount: $11,666.67 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the facility in the maintenance shops, employees operating and/or performing deburring operations on lathes were exposed to struck by, caught-in and amputation hazards. The following lathe did not have point of operation guarding: LeBlond Makino lathe 15" located in Back maintenance shop. 2-4 Type of Violation: Serious Penalty Amount: $11,666.67 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the facility in the maintenance shops, employees operating and/or performing deburring operations on lathes were exposed to struck by, caught-in and amputation hazards. The following lathe did not have point of operation guarding: South Bend lathe 16" located in the Barn maintenance shop. 2-5 Type of Violation: Serious Penalty Amount: $11,666.67 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the facility in the maintenance shops, employees operating and/or performing deburring operations on lathes were exposed to struck by, caught-in and amputation hazards. The following lathe did not have point of operation guarding: Jet lathe 12" located in the Barn maintenance shop. 2-6 Type of Violation: Serious Penalty Amount: $11,666.67 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the facility in the maintenance shops, employees operating and/or performing deburring operations on lathes were exposed to struck by, caught-in and amputation hazards. The following lathe did not have point of operation guarding: LeBlond lathe 15" located in the Front maintenance shop.