Violation Detail
Standard Cited: 19100023 C03 Ladders.
Inspection Nr: 1087390.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $22,000.00
Current Penalty: $17,600.00
Issuance Date: 01/28/2016
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 02/26/2016
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 02/12/2016
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 02/12/2016 | $17,600.00 | 02/26/2016 | Repeat | |
Penalty | Z: Issued | 01/28/2016 | $22,000.00 | 02/26/2016 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.23(c)(3): Regardless of height, open-sided floors, walkways, platforms, or runways above or adjacent to dangerous equipment, pickling or galvanizing tanks, degreasing units, and similar hazards were not guarded with a standard railing and toe board. (a) By the Debarking Coop the bottom of the stairs, a standard railing and toe board was not installed on the platform where employees would walk to reset the breakers and walk to another section of the building exposing the employees to struck by hazards. This is located on the back side of the debarker and where the 10 foot lathe had been installed. Besse Forest Products, Inc. dba Goodman Veneer & Lumber was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.23(c)(3), which was contained in OSHA inspection number 985617, citation number 1, item number 4 and was affirmed as a final order on January 23, 2015, with respect to a workplace located at 200 C Avenue, Goodman, Wisconsin. (b) In the Green End by the Core Conveyor Area, the platform used to cross the cores conveyor did not have a mid rail installed exposing employees to struck by hazards. Besse Forest Products, Inc. dba Goodman Veneer & Lumber was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.23(c)(1), which was contained in OSHA inspection number 985617, citation number 1, item number 3 and was affirmed as a final order on January 23, 2015, with respect to a workplace located at 200 C Avenue, Goodman, Wisconsin.