Translate
Violation Detail
Standard Cited: 19100212 A02 General requirements for all machines.
Inspection Nr: 1010897.015
Citation: 02001
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/25/2015
Nr Instances: 1
Nr Exposed: 6
Abatement Date:
Gravity:
Report ID: 0522500
Contest Date:
Final Order: 03/19/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/19/2015 | $0.00 | Other | ||
| Penalty | Z: Issued | 02/25/2015 | $0.00 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(2): Machine guarding. General requirements for machine guards. Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself. Ball Corporation, 2690 Charter Street, Columbus Ohio workplace: On or about December 1, 2014, in the Weld department, at the following locations machine guarding was secure and affixed properly: a. at the Line 1 Stacker; a barrier guard was not secure and properly affixed. Allen head screws were missing and/or loose. b. at the Line 1 Slitter adjacent to the Slitter door interlock: the feeder barrier guard housing was not secure and affixed. An allen head screw was missing.