Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1010588.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $70,000.00
Current Penalty: $56,000.00
Issuance Date: 05/19/2015
Nr Instances: 1
Nr Exposed: 14
Abatement Date: 06/15/2015
Gravity: 10
Report ID: 0522300
Contest Date: 06/11/2015
Final Order: 11/18/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 11/18/2015 | $56,000.00 | 06/15/2015 | Repeat | |
| Penalty | C: Contested | 06/16/2015 | $70,000.00 | 06/15/2015 | Willful | |
| Penalty | Z: Issued | 05/19/2015 | $70,000.00 | 06/15/2015 | Willful |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about November 25, 2014, the employer did not conduct periodic inspections of the energy control procedures at least annually to ensure the procedures and requirements of the standards were being followed. Forging Department equipment includes, but is not limited to, steam hammers, mechanically powered hot trim presses, and hydraulic hot trim presses, Hazardous energy sources include, but are not limited to, electrical, pneumatic, hydraulic, and mechanical power.