Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1007462.015
Citation: 02001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $9,800.00
Current Penalty: $5,880.00
Issuance Date: 05/06/2015
Nr Instances: 2
Nr Exposed: 5
Abatement Date: 06/30/2015
Gravity: 10
Report ID: 0524530
Contest Date:
Final Order: 06/01/2015
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/01/2015 | $5,880.00 | 06/30/2015 | Repeat | |
Penalty | Z: Issued | 05/06/2015 | $9,800.00 | 05/12/2015 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by unguarded bandsaw blades: On or about 12/09/2014, in the HEM Saw area, the employer did not ensure that machine guarding was provided to protect operator from hazards created by unguarded saw blades when: a. On the HEM Saw, Model Cyclone, Serial Number 832903, employees were exposed to an eight & one quarter (8.25) inch unguarded section of the bandsaw blade on the back side of the saw. b. On the HEM Saw, Model Cyclone, Serial Number 832903, employees were exposed to a two & three quarters (2.75) inch unguarded section of the bandsaw blade on the front side of the saw. The company (All Steel Products, Inc) was previously cited for a violation of this occupational safety and health standard or its equivalent standard; 29 CFR 1910.212 (a)(1), which was contained in OSHA inspection number 313017667, citation number 1, item number 01 and was affirmed as a final order on 02/03/2011, with respect to a workplace located at 1201 Janette Drive, Vandalia, IL 62471.