Aluminum Shapes, Llc. | Occupational Safety and Health Administration osha.gov

Violation Detail

Standard Cited: 19100303 G01 General.

Inspection Nr: 1059368.015

Citation: 01029A

Citation Type: Serious

Abatement Status: Not Completed - AD Discretion

Initial Penalty: $5,000.00

Current Penalty: $2,500.00

Issuance Date: 09/22/2015

Nr Instances: 3

Nr Exposed: 3

Abatement Date: 07/15/2016

Gravity: 5

Report ID: 0213900

Contest Date: 10/14/2015

Final Order: 06/03/2016

Related Event Code (REC):

Emphasis:

**Penalty and Failure to Abate Event History**
Type	Latest Event	Event Date	Penalty	Abatement Due Date	Citation Type
Penalty	J: ALJ Decision	06/03/2016	$2,500.00	07/15/2016	Serious
Penalty	C: Contested	10/19/2015	$5,000.00	10/14/2015	Serious
Penalty	Z: Issued	09/22/2015	$5,000.00	10/14/2015	Serious

Text For Citation: 01 Item/Group: 029A Hazard:

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a)9000 River Rd, Delair, NJ- Fabrication Machine Shop, DS Row Section: Electrical panel boxes including but not limited to panels rated at 120V up to 460V did not have sufficient work space about them and were not readily accessible in an emergency situation due to being blocked by a work bench and spare materials, observed on or about 4/16/15. b)9000 River Rd, Delair, NJ- Fabrication Machine Shop, Individual Equipment Disconnect Section: Electrical panel boxes including but not limited to panels rated at 120V up to 460V did not have sufficient work space about them and were not readily accessible in an emergency situation due to being blocked by a work bench and spare materials, observed on or about 4/16/15. c)900 River Rd, Delair, NJ- Foundry, Furnace Electrical Controls: Electrical panel boxes including but not limited to panels rated at 120V up to 460V did not have sufficient work space about them and were not readily accessible in an emergency situation due to being blocked by a work bench and spare materials, observed on or about 4/16/15. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.