Translate
Violation Detail
Standard Cited: 19100254 D08 Arc welding and cutting.
Inspection Nr: 1291102.015
Citation: 01028A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,467.00
Current Penalty: $6,467.00
Issuance Date: 07/24/2018
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 09/17/2018
Gravity: 5
Report ID: 0625400
Contest Date:
Final Order: 08/24/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/24/2018 | $6,467.00 | 09/17/2018 | Serious | |
| Penalty | Z: Issued | 07/24/2018 | $6,467.00 | 07/25/2018 | Serious |
Text For Citation: 01 Item/Group: 028A Hazard:
29 CFR 1910.254(d)(8): Welding cables with splices within 10 feet (3 m) of the holder were used: a) On or about March 22, 2018, in the testing area, a 240 volt Miller welder cable was spliced within approximately 8 feet of the holder. Employees use the welder to make repairs to the tank, exposing employees to an electrical shock hazard. b) On or about March 22, 2018, located outside between the assembly and fabrication shop, a 240 volt Miller welder cable was repaired with electrical tape. Employees use the welder to make repairs to the tank, exposing employees to an electrical shock hazard. c) On or about March 29, 2018, inside the fabrication shop, at the Miller welder, on the ground lead (electrode) which still can carry DC voltage, the internal conductor was exposed where they made a splice to add more cable, exposing employees to an electrical shock hazard.