Translate
Violation Detail
Standard Cited: 19100333 A01 Selection and use of work practices
Inspection Nr: 1021840.015
Citation: 01021A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $5,500.00
Current Penalty: $3,575.00
Issuance Date: 06/24/2015
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 08/11/2015
Gravity: 5
Report ID: 0418100
Contest Date:
Final Order: 07/16/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/16/2015 | $3,575.00 | 08/11/2015 | Serious | |
| Penalty | Z: Issued | 06/24/2015 | $5,500.00 | 08/11/2015 | Serious |
Text For Citation: 01 Item/Group: 021A Hazard:
29 CFR 1910.333(a)(1): "Deenergized parts." Live parts to which an employee may be exposed shall be deenergized before the employee works on or near them, unless the employer can demonstrate that deenergizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. On 2/4/15, at Plant 4, employees working in Press 1 480v electrical panel did not use work practices that were suitable for the conditions under which the work was performed in that, the incoming power supply at the lugs remained energized while employees performed service work. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).