Translate
Violation Detail
Standard Cited: 19100305 A02 X Wiring methods, components, and equipment for general use.
This violation item has been deleted.
Inspection Nr: 1366023.015
Citation: 01019B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/03/2019
Nr Instances: 1
Nr Exposed: 100
Abatement Date: 04/09/2019
Gravity: 5
Report ID: 0111700
Contest Date: 04/23/2019
Final Order: 04/27/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/27/2022 | $0.00 | 04/09/2019 | Serious | |
| Penalty | C: Contested | 04/26/2019 | $0.00 | 04/09/2019 | Serious | |
| Penalty | Z: Issued | 04/03/2019 | $0.00 | 04/09/2019 | Serious |
Text For Citation: 01 Item/Group: 019B Hazard:
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. Shipping Area exterior building exit- Employees entering and exiting the facility were not protected from an electric shock hazard where a 480 volt branch circuit was run through a concrete wall without any protective conduit and placed directly on the ground outside the exit to service a temporary air compressor. The 480 volt branch circuit was placed on the ground between the building and compressor where employees walk from the parking lot and step on the branch circuit; which was evident due to the foot prints in the snow.