Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1377997.015
Citation: 01018B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $10,419.00
Current Penalty: $0.00
Issuance Date: 07/30/2019
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 01/11/2021
Gravity: 5
Report ID: 0728500
Contest Date: 08/19/2019
Final Order: 05/11/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/11/2020 | $0.00 | 01/11/2021 | Serious | |
| Penalty | C: Contested | 08/21/2019 | $10,419.00 | 09/16/2019 | Serious | |
| Penalty | Z: Issued | 07/30/2019 | $10,419.00 | 09/16/2019 | Serious |
Text For Citation: 01 Item/Group: 018B Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws The employer is failing to protect employees from an electrical hazards associated with inadequate electrical wiring.. This was most recently documented on March 14, 2019 at a worksite located at 1078 S Jefferson Ave, Lebanon, Missouri. Where the employer has employees in the Alternatives Department operating the Bulk chip weighing scale powered by a flexible cord with inadequate strain relief at the plug-in end, pulling the insulation back exposing interior wiring.