Translate
Violation Detail
Standard Cited: 19100303 C03 I General.
Inspection Nr: 1298240.015
Citation: 01018B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $11,641.00
Current Penalty: $0.00
Issuance Date: 08/16/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 09/05/2018
Gravity: 10
Report ID: 0522500
Contest Date: 09/18/2018
Final Order: 08/07/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/07/2019 | $0.00 | 09/05/2018 | Serious | |
| Penalty | C: Contested | 09/19/2018 | $11,641.00 | 09/05/2018 | Serious | |
| Penalty | Z: Issued | 08/16/2018 | $11,641.00 | 09/05/2018 | Serious |
Text For Citation: 01 Item/Group: 018B Hazard:
29 CFR 1910.303(c)(3)(i): Conductors shall be spliced or joined with splicing devices identified for the use or by brazing, welding, or soldering with a fusible metal or alloy. Soldered splices shall first be spliced or joined to be mechanically and electrically secure without solder and then soldered. All splices and joints and the free ends of conductors shall be covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose: a. On or about February 28, 2018, located in the Maintenance Shop, there was a box fan that was used as an exhaust for heat that had a splice to connect two wire ends without solder and without insulation, thereby exposing the employees to an electrical shock hazard of 120 vac.