Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 312889496
Citation: 01017C
Citation Type: Serious
Abatement Status: X
Initial Penalty: $2,500.00
Current Penalty:
Issuance Date: 11/27/2009
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 12/07/2009
Gravity: 10
Report ID: 0524500
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/15/2009 | 12/07/2009 | Serious | ||
| Penalty | Z: Issued | 11/27/2009 | $2,500.00 | 12/07/2009 | Serious |
Text For Citation: 01 Item/Group: 017C Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees loading P88731NAT 51" paper on the Reelite 1 ton hoist system located on the Paper Compactor machine were exposed to crush-by hazards and the employer did not ensure the hoist was not loaded in excess of its rated load. ASME B30.16-2007 Overhead Hoists (Underhung): Section 16-3.2.1: "The hoist shall not be loaded in excess of its rated load except for test purposes as provided in paragraph 16-2.2.2 or for planned engineered lifts as provided in paragraph 16-3.2.2" Among other methods, feasible and acceptable abatement methods to correct this hazard is to comply with ASME B30.16-2007 Overhead Hoists (Underhung), including but not limited to: a) Ensure the hoist system being used can safely handle the load being lifted and the load is not in excess of the rated load. ***Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)***
Translate