Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1059368.015
Citation: 01017
Citation Type: Serious
Abatement Status: Not Completed - AD Discretion
Initial Penalty: $5,000.00
Current Penalty: $2,500.00
Issuance Date: 09/22/2015
Nr Instances: 8
Nr Exposed: 10
Abatement Date: 07/15/2016
Gravity: 5
Report ID: 0213900
Contest Date: 10/14/2015
Final Order: 06/03/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 06/03/2016 | $2,500.00 | 07/15/2016 | Serious | |
| Penalty | C: Contested | 10/19/2015 | $5,000.00 | 10/14/2015 | Serious | |
| Penalty | Z: Issued | 09/22/2015 | $5,000.00 | 10/14/2015 | Serious |
Text For Citation: 01 Item/Group: 017 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a)9000 River Rd, Delair, NJ- Building 11, Fabrication Shop: Employees operated a Wilton Horizontal band saw to cut materials such as but not limited to metal and plastic with approximately five inches of the unused portion of the blade exposed, which occurred on or about and at times prior thereto 5/13/15. b)9000 River Rd, Delair, NJ- Building 1, Fabrication Machine Shop: Employees operated a 1" belt sander to fabricate parts without a guard to protect employees from flying chips or particles, observed on or about 4/16/15. c)9000 River Rd, Delair, NJ- Building 11, Fabrication Machine Shop: Employees operated a Birmingham Lathe (machine 2124) without a guard to protect from the rotating action of the chuck and part, on or about 4/16/15. d)9000 River Rd, Delair, NJ- Building 1, Fabrication Machine Shop: Employees operated a South Bend Precision Lathe without a guard to protect from the rotating action of the chuck and part, on or about 4/16/15. e)9000 River Rd, Delair, NJ- Building 1, Fabrication Machine Shop: Employees used a Bridgeport milling machine and a Victor milling machine without a guard to protect from the rotating action of the chuck to fabricate parts, on or about 4/16/15. f)9000 River Rd, Delair, NJ- Building 1, Fabrication Shop; Employees used a Oliver metal cutting saw (internal machine 117) with insufficient chip guarding, on or about 6/22/15. g)9000 River Rd, Delair, NJ- Building 1, Fabrication Shop: Employees operated a Drill Press (6020-4) without a guard to protect from the rotating action of the chuck to fabricate aluminum products, on or about 5/13/15. h)9000 River Rd, Delair, NJ- Building 10, Danieli Press: Employees took measurements of aluminum extruded products at the Danieli press which was not guarded to prevent employees from having any part of their body in the danger zone during the operating cycle, occurred on or about 7/19/15 NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.