Text For Citation: 01 Item/Group: 015C Hazard:

29 CFR 1910.334(a)(2)(ii): If there is a defect or evidence of damage that might expose an employee to injury, the defective or damaged item shall be removed from service, and no employee may use it until repairs and tests necessary to render the equipment safe have been made: a. Next to press C7008, the TPI industrial fan had a damaged flexible cord that was wrapped with electrical tape, thereby exposing employees to an electrical hazard. b. On press line C7008, the trimmer 3Z-11 had a damaged flexible cord/cable, thereby exposing employee to an electrical hazard. c. On press line C7008, the TPI industrial fan mounted to the beam had a damaged flexible cord, thereby exposing employees to an electrical hazard. d. On press line C7007, there was a 240VAC flexible cord for the Rima stacker that was damaged, thereby exposing employees to an electrical hazard. e. The Dayton industrial fan, near the Mosca strapping sign, did not have a grounding pin, thereby exposing employees to an electrical hazard. f. The Tenant T3 floor cleaner was missing the ground pin, thereby exposing employees to an electrical hazard. g. On the C7009 press line, near the color console, there was an ungrounded power tap, thereby exposing employees to an electrical hazard. h. On press line C7008, there was a fan mounted on a steel beam that was missing the ground pin, thereby exposing employees to an electrical hazard. i. On press line C5008, there was a portable cart with an relocatable power tap that was missing the ground pin, thereby exposing employees to an electrical hazard. j. Between the C5007 and C5008 press lines, the work smart model FS-50 pedestal fan was missing a ground pin, thereby exposing employees to an electrical hazard. k. The core unwinder for presses C5007 and C5008 was missing the ground pin, thereby exposing employees to an electrical hazard. l. The core unwinder for presses C7007 & C7008, had flexible cord used to power the fixed piece of equipment, thereby exposing employees to an electrical hazard. m. The core unwinder for presses N012, had flexible cord used to power the fixed piece of equipment, thereby exposing employees to an electrical hazard. n. The core unwinder for presses N010/011, had flexible cord used to power the fixed piece of equipment, thereby exposing employees to an electrical hazard. o. The core unwinder for presses C7009, had flexible cord used to power the fixed piece of equipment, thereby exposing employees to an electrical hazard. p. The core unwinder for presses C5007 & C5008, had flexible cord used to power the fixed piece of equipment, thereby exposing employees to an electrical hazard. q. In the maintenance shop, the Bridgeport Milling Machine was powered by flexible cord/cable run from a disconnect box to the fixed piece of equipment, thereby exposing employees to an electrical hazard. r. In the maintenance shop, there was a disconnect box that was affixed to a fence post job made support that was powered with flexible cord/cable, thereby exposing employees to an electrical hazard.