Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 445406.015
Citation: 01015
Citation Type: Serious
Abatement Date: 12/14/2012 2
Initial Penalty: $6,300.00
Current Penalty: $4,725.00
Issuance Date: 11/19/2012
Nr Instances: 4
Nr Exposed: 4
Related Event Code (REC):
Gravity: 10
Report ID: 0213900
Contest Date: 12/05/2012
Final Order: 06/13/2013
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 06/13/2013 | $4,725.00 | 12/14/2012 | Serious | |
| Penalty | C: Contested | 12/15/2012 | $6,300.00 | 12/14/2012 | Serious | |
| Penalty | Z: Issued | 11/19/2012 | $6,300.00 | 12/14/2012 | Serious |
Text For Citation: 01 Item/Group: 015 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Clip lines 1 - 4: At the point of operation for employees that operated the Stamtec GL-60 hydraulic press, it was not guarded, on or about 5/21/12. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.