Translate
Violation Detail
Standard Cited: 19100215 A04 Abrasive wheel machinery.
Inspection Nr: 1664064.015
Citation: 01015
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,250.00
Current Penalty: $4,700.00
Issuance Date: 10/11/2023
Nr Instances: 2
Nr Exposed: 2
Abatement Date: 10/30/2023
Gravity: 5
Report ID: 0627700
Contest Date:
Final Order: 10/27/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/27/2023 | $4,700.00 | 10/30/2023 | Serious | |
| Penalty | Z: Issued | 10/11/2023 | $6,250.00 | 10/30/2023 | Serious |
Text For Citation: 01 Item/Group: 015 Hazard:
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch. The employer does not ensure on grinding machinery was adjusted closely to the wheel with a maximum opening of one eighth inch, exposing employees to the hazard of being struck by flying debris: This violation was observed on or about April 17, 2023, at the west wall of the facility in the middle of the shop, where two bench grinders were observed with the work rest more than 1/8 of an inch from the abrasive wheel. Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure the distance between abrasive wheel and machinery is no more than an eighth of an inch.