Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 998318.015
Citation: 01014F
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $1,600.00
Current Penalty: $0.00
Issuance Date: 04/01/2015
Nr Instances: 2
Nr Exposed: 10
Abatement Date: 05/06/2016
Gravity: 5
Report ID: 0213100
Contest Date: 04/23/2015
Final Order: 01/06/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 01/06/2016 | $0.00 | 05/06/2016 | Serious | |
| Penalty | C: Contested | 05/07/2015 | $1,600.00 | 04/20/2015 | Serious | |
| Penalty | Z: Issued | 04/01/2015 | $1,600.00 | 04/20/2015 | Serious |
Text For Citation: 01 Item/Group: 014F Hazard:
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Tumbler Room - On or about October 3, 2014, a pulley approximately 2 feet in height from the ground on the A Bank tumblers was not guarded exposing employees to in running nip points. b) Tumbler Room - On or about October 3, 2014, a pulley approximately 2 feet in height from the ground on the B Bank tumblers was not guarded exposing employees to in running nip points. c) Tumbler Room - On or about October 3, 2014, a pulley approximately 4 feet in height from the ground on Lathe 1 was not guarded exposing employees to in running nip points. d) Tumbler Room - On or about October 3, 2014, a pulley approximately 4 feet in height from the ground on Lathe 2 was not guarded exposing employees to in running nip points.