Translate
Violation Detail
Standard Cited: 19100305 G02 II Wiring methods, components, and equipment for general use.
This violation item has been deleted.
Inspection Nr: 1077467.015
Citation: 01014B
Citation Type: Serious
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/24/2015
Nr Instances: 5
Nr Exposed: 30
Abatement Date: 02/12/2016
Gravity: 10
Report ID: 0729300
Contest Date:
Final Order: 01/21/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/21/2016 | $0.00 | 02/12/2016 | Serious | |
| Penalty | Z: Issued | 12/24/2015 | $0.00 | 02/12/2016 | Serious |
Text For Citation: 01 Item/Group: 014B Hazard:
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: a/ At the Kieserling Line, an orange, flexible cord was spliced together without brazing, welding, or soldering with a fusible metal or alloy. The splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose. b/ At the Schumag Line, a flexible cord was spliced together without brazing, welding, or soldering with a fusible metal or alloy. The splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose. This flexible cord was located between two sections of metal flooring. c/ At the Schumag Line, a flexible cord was spliced together without brazing, welding, or soldering with a fusible metal or alloy. The splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose. This flexible cord was located on the metal grating running paralell to the line. d/ At the Schumag line, a flexible cord was spliced together without brazing, welding, or soldering with a fusible metal or alloy. The splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of conductors or with an insulating device identified for the purpose. This flexible cord was used to power a Makita Sander, m/n 9031, unknown s/n. e/ At Building #2, specifically the rear aisleway, an orange flexible cord was spliced together without brazing, welding, or soldering with a fusible metal or alloy. The splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose. This flexible cord was powering a floor mounted fan.