Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 445406.015
Citation: 01014
Citation Type: Serious
Abatement Date: 12/14/2012 2
Initial Penalty: $6,300.00
Current Penalty: $0.00
Issuance Date: 11/19/2012
Nr Instances: 1
Nr Exposed: 14
Related Event Code (REC):
Gravity: 10
Report ID: 0213900
Contest Date: 12/05/2012
Final Order: 06/13/2013
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 06/13/2013 | $0.00 | 12/14/2012 | Serious | |
| Penalty | C: Contested | 12/15/2012 | $6,300.00 | 12/14/2012 | Serious | |
| Penalty | Z: Issued | 11/19/2012 | $6,300.00 | 12/14/2012 | Serious |
Text For Citation: 01 Item/Group: 014 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Facility (Center) - Employees were exposed to the heated metal bar stock on all sides of the Autoformer, because there was no guarding separating employees from the hazards created by flying chips, on or about 5/21/12. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.