Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100119 J04 IV Process safety management of highly hazardous chemicals.

Inspection Nr: 735302.015

Citation: 01012B

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $0.00

Current Penalty: $0.00

Issuance Date: 04/26/2013

Nr Instances: 1

Nr Exposed: 19

Abatement Date: 05/10/2013

Gravity: 10

Report ID: 0626600

Contest Date:

Final Order: 06/28/2013

Related Event Code (REC):

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty I: Informal Settlement 06/28/2013 $0.00 05/10/2013 Serious  
Penalty Z: Issued 04/26/2013 $0.00 05/10/2013 Serious  

Text For Citation: 01 Item/Group: 012B Hazard:

29 CFR 1910.119(j)(4)(iv): The employer did not document the date of inspection, the name of the person performing the inspection, the serial number or other identifier of the equipment on which the inspection or test was performed, a description of the inspection, and the results of the inspection for each piece of process equipment. The employer does not ensure testing and inspection performed on process equipment is documented including the date, serial number or identifier of equipment, a description, and the results of the inspection and/or test performed. The violation occurred on or about November 6, 2012 and times prior thereto, in the propane container filling and evacuation areas where the employer failed to ensure the documentation of the date, system identifier, description, and results of inspections and tests of the emergency shutdowns (E-Stops).This condition exposed employees to fire and explosion hazards. Pursuant to 29 C.F.R. 1903.19, within (10) calendar days of the abatement date the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure testing and inspection performed on process equipment is documented including the date, serial number or identifier of equipment, a description, and the results of the inspection and/or test performed.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close