Translate
Violation Detail
Standard Cited: 19100304 E01 IV Wiring design and protection.
Inspection Nr: 314188251
Citation: 01012
Citation Type: Other
Abatement Status: I
Initial Penalty: $1,400.00
Current Penalty:
Issuance Date: 11/09/2010
Nr Instances: 1
Nr Exposed: 8
Abatement Date: 11/12/2010
Gravity: 01
Report ID: 0854910
Contest Date: 12/06/2010
Final Order: 10/31/2011
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | W: Empr Withdrew | 10/31/2011 | 11/12/2010 | Other | ||
| Penalty | I: Informal Settlement | 07/21/2011 | 11/12/2010 | Other | ||
| Penalty | Z: Issued | 11/09/2010 | $1,400.00 | 11/12/2010 | Serious |
Text For Citation: 01 Item/Group: 012 Hazard: REFINERY
29 CFR 1910.304(e)(1)(iv): Location in or on premises. Overcurrent devices shall be readily accessible to each employee or authorized building management personnel. These overcurrent devices may not be located where they will be exposed to physical damage nor in the vicinity of easily ignitable material. (A) On 9/7/10, a safety inspection was accomplished by a UOSH compliance officer at Big West Oil LLC, 333 W. Center St., North Salt Lake. During the walk through of the storage building, the Compliance Officer observed items stored in front of an overcurrent device in the "old tool shop" making accessibility to the panel difficult. Overcurrent devices need to be readily accessible to employees in the event of an emergency. In the event of an electrical emergency, serious injuries could occur when an employee did not have the ability to access the blocked overcurrent device.rent