Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1655395.015
Citation: 01012
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $15,625.00
Current Penalty: $5,000.00
Issuance Date: 09/07/2023
Nr Instances: 6
Nr Exposed: 5
Abatement Date: 10/03/2023
Gravity: 10
Report ID: 0317700
Contest Date: 09/29/2023
Final Order: 05/27/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/27/2024 | $5,000.00 | 10/03/2023 | Serious | |
| Penalty | C: Contested | 10/25/2023 | $15,625.00 | 10/03/2023 | Serious | |
| Penalty | Z: Issued | 09/07/2023 | $15,625.00 | 10/03/2023 | Serious |
Text For Citation: 01 Item/Group: 012 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Fabrication Area: Employees were exposed to an amputation hazard while operating the Pacific hydraulic press brake, model 400, serial number 3972, which was not equipped with point of operation guarding, on or about March 8, 2023. b) Fabrication Area: An employee was exposed to an amputation hazard while operating the green Pacific hydraulic press brake, model J90, which was not equipped with point of operation guarding, on or about March 8, 2023. c) Fabrication Area: An employee was exposed to an amputation hazard while operating the white Pacific hydraulic press brake, model J90, which was not equipped with point of operation guarding, on or about March 8, 2023. d) Fabrication Area: Employees were exposed to a crushing and amputation hazard while operating the Cincinnati shear, model 500 (white), which was not equipped with adequate point of operation guarding for the blade and hold down clamps, on or about March 8, 2023. e) Fabrication Area: Employees were exposed to a crushing and amputation hazard while operating the Cincinnati shear, model 1812G (green), which was not equipped with adequate point of operation guarding for the blade and hold down clamps, on or about March 8, 2023. f) Fabrication Area: Employees were exposed to a crushing and amputation hazard while operating the Accu-Shear machine, which was not equipped with adequate point of operation guarding for the blade and hold down clamps, on or about March 8, 2023. ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED