Violation Detail
Standard Cited: 19261101 O03 I Asbestos
Inspection Nr: 1600004.015
Citation: 01012
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $4,351.00
Current Penalty: $3,480.80
Issuance Date: 11/25/2022
Nr Instances: 1
Nr Exposed: 5
Abatement Date: 06/13/2024
Gravity: 10
Report ID: 0728500
Contest Date: 12/07/2022
Final Order: 06/03/2024
Related Event Code (REC):
Emphasis:
Substance: 9020
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 06/03/2024 | $3,480.80 | 06/13/2024 | Other | |
Penalty | C: Contested | 12/08/2022 | $4,351.00 | 12/21/2022 | Serious | |
Penalty | Z: Issued | 11/25/2022 | $4,351.00 | 12/21/2022 | Serious |
Text For Citation: 01 Item/Group: 012 Hazard:
29 CFR 1926.1101(o)(3)(i): On all worksites where employees are engaged in Class I or II asbestos work, the competent person designated in accordance with 29 CFR 1926.1101(e)(6) did not perform or supervise the following duties, as applicable as specified in 29 CFR 1926.1101(o)(3)(i)(A) through 29 CFR 1926.1101(o)(3)(i)(I): At a worksite located at 12650 Manchester Ave, Grandview, MO 64030: The employer is failing to protect employees from the health hazards associated with asbestos. This was demonstrated on or about June 3, 2022, and at times prior to when the employer did not ensure that the designated competent person performed or supervised the following activities: a) The competent person did not establish procedures to control entry to and exit from the enclosure or area. b) The competent person did not ensure that employees working within the enclosure wear personal protective equipment including but not limited to body coverings such as Tyvek suits, boot coverings, head coverings, and gloves. c) The competent person did not ensure through on-site supervision that employees set up, use, and remove engineering controls, and use work practices and personal protective equipment in compliance with all requirements. d) The competent person did not ensure that employees use the hygiene facilities and observe the decontamination procedures specified in 1926.1101(j). e) The competent person did not ensure through on-site inspection that engineering controls are functioning properly and that employees are using proper work practices. f) The competent person did not ensure that the notification requirements in 1926.1101(k) were met.