Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1126756.015
Citation: 01011E
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/15/2016
Nr Instances: 1
Nr Exposed: 8
Abatement Date:
Gravity:
Report ID: 0830600
Contest Date:
Final Order: 08/04/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/04/2016 | $0.00 | Other | ||
| Penalty | Z: Issued | 07/15/2016 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 011E Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) North millwright shop: On or about March 4, 2016, and at times prior, workers were exposed to electrical shock hazards where the cord end fittings of a welder and parts cleaner were not attached to prevent direct pull on conductor terminations. b) South rail dock crane: On or about March 4, 2016, and at times prior, crane wiring and equipment did not comply with Subpart S per 1910.179(g)(1)(i), in that workers were exposed to injuries related to electrical fires, shock, and electrocution where the crane cab heater cord entering a panel allowed for direct pull on terminal screws. Abatement Note: Employer completed abatement during inspection.