Text For Citation: 01 Item/Group: 011D Hazard:

29 CFR 1910.1053(j)(3)(i): The employer did not ensure that each employee covered by this section could demonstrate knowledge and understanding of the following: (A) the health hazards associated with exposure to respirable crystalline silica; (B) specific tasks in the workplace that could result in exposure to respirable crystalline silica; (C) specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica, including engineering controls, work practices, and respirators to be used; (D) the contents of this section; and, (E) the purpose and a description of the medical surveillance program required by paragraph (i) of this section: a) Fabrication Area - On or about February 23, 204, the employer did not ensure that employees cutting, grinding and polishing engineered stone countertops containing up to 60% silica quartz were provided with training regarding the health hazards of respirable crystalline silica (RCS); tasks that exposed them to the RCS; and any implemented control measures. Employees conducting engineered stone countertop grinding and polishing operations were exposed to respirable crystalline silica dust approximately 3-6 times the OSHA Permissible Exposure Limit (PEL) of 50 ?g/m3. In accordance with 29 CFR 1903.19 (d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstration that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of purchase or repair of equipment, photographic or video evidence of abatement or other written records.