Translate
Violation Detail
Standard Cited: 19100215 B09 Abrasive wheel machinery.
This violation item has been deleted.
Inspection Nr: 1597497.015
Citation: 01011C
Citation Type: Serious
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/21/2022
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 11/17/2022
Gravity: 5
Report ID: 0213900
Contest Date:
Final Order: 11/11/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/11/2022 | $0.00 | 11/17/2022 | Serious | |
| Penalty | Z: Issued | 10/21/2022 | $0.00 | 11/17/2022 | Serious |
Text For Citation: 01 Item/Group: 011C Hazard:
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) 1st Stage -Prep room: The right side of the bench grinder did not have a tongue guard and the distance between the abrasive wheel and peripheral measured 5/8 inches. Observed on or about the 6th of July 2022. b) 1st Stage -Prep room: The left side of the bench grinder did not have a tongue guard and the distance between the abrasive wheel and peripheral was greater than one fourth inches. Observed on or about the 6th of July 2022. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.