Translate
Violation Detail
Standard Cited: 19100215 A04 Abrasive wheel machinery.
This violation item has been deleted.
Inspection Nr: 1597497.015
Citation: 01011B
Citation Type: Serious
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/21/2022
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 11/17/2022
Gravity: 5
Report ID: 0213900
Contest Date:
Final Order: 11/11/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/11/2022 | $0.00 | 11/17/2022 | Serious | |
| Penalty | Z: Issued | 10/21/2022 | $0.00 | 11/17/2022 | Serious |
Text For Citation: 01 Item/Group: 011B Hazard:
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) 1st Stage -Prep room: The left side work rest on the bench grinder was measured at 5/8 inches distance from wheel to edge. Observed on or about the 6th of July 2022. b) 1st Stage -Prep room: The right side work rest on the bench grinder was measured at 3/8 inches distance from wheel to edge. Observed on or about the 6th of July 2022. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.