Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 993351.015
Citation: 01011A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $5,000.00
Current Penalty: $3,480.00
Issuance Date: 03/03/2015
Nr Instances: 5
Nr Exposed: 5
Abatement Date: 04/05/2015
Gravity: 5
Report ID: 0215800
Contest Date: 03/20/2015
Final Order: 03/31/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 03/31/2016 | $3,480.00 | 04/05/2015 | Serious | |
| Penalty | C: Contested | 03/25/2015 | $5,000.00 | 04/05/2015 | Serious | |
| Penalty | Z: Issued | 03/03/2015 | $5,000.00 | 04/05/2015 | Serious |
Text For Citation: 01 Item/Group: 011A Hazard:
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Roof, on or about 9/4/14: 471 Glaze Block cooling fan, in-running nip points of the belt and pulley drive approximately 3 feet above the work surface was not guarded on the shaft side where employees perform maintenance. b) Roof, on or about 9/4/14: 472 Glaze Block cooling fan, in-running nip points of the belt and pulley drive approximately 3 feet above the work surface was not guarded on the shaft side where employees perform maintenance. c) Roof, on or about 9/4/14: D Kiln primary fan belt and pulley drive approximately 3 feet above the work surface was not guarded on the shaft side where employees perform maintenance. d) Roof, on or about 9/4/14: D Kiln chiller fan, belt and pulley drive approximately 3 feet above the work surface was not guarded on the shaft side where employees perform maintenance.