Translate
Violation Detail
Standard Cited: 19100216 A04 Mills and calenders in the rubber and plastics industries.
This violation item has been deleted.
Inspection Nr: 1619294.015
Citation: 01011A
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $10,360.00
Current Penalty: $0.00
Issuance Date: 01/10/2023
Nr Instances: 1
Nr Exposed: 2
Abatement Date:
Gravity: 5
Report ID: 0112000
Contest Date: 02/06/2023
Final Order: 04/05/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/05/2023 | $0.00 | Serious | ||
| Penalty | C: Contested | 02/06/2023 | $10,360.00 | Serious | ||
| Penalty | Z: Issued | 01/10/2023 | $10,360.00 | Serious |
Text For Citation: 01 Item/Group: 011A Hazard:
29 CFR 1910.216(a)(4): New mill installations were not installed so that the top of the operating rolls was not less than 50 inches above the level where the operator was standing, irrespective of the size of the mill: North Building, R&D/Physical Testing Laboratory: On, or about, October 14, 2022, the height of the mill rolls on the tan Farrel mix mill, number 53089, was measured to be 46 inches above the floor.