Text For Citation: 01 Item/Group: 011 Hazard:

29 CFR 1910.119(j)(5): The employer did not correct deficiencies in equipment that were outside acceptable limits (defined by the process safety information on paragraph (d) of this section) before use: a) Chlorine process: The employer did not repair the broken chlorine gas gauge on the H furnace evaporator. The gauge was broken and employees could not identify the temperature of the gas leaving the evaporator to the furnace, on or about 8/10/21. b) Chlorine process: The employer did not repair the broken water level indicator on the H furnace evaporator used to determine the amount of water in the hot water tank used to heat the chlorine, on or about 8/10/21. c) Chlorine process: The employer did not repair the broken low water indicator light on the H furnace evaporator used to measure the water level in the hot water tank used to heat the chlorine, on or about 8/10/21. d) Chlorine process: The employer did not repair the high and low temperature indicators on the H furnace evaporator used to measure the water temperature in the hot water tank used to heat the chlorine, on or about 8/10/21. . NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.