Translate
Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
This violation item has been deleted.
Inspection Nr: 315082628
Citation: 01010B
Citation Type: Serious
Abatement Status: I
Initial Penalty:
Current Penalty:
Issuance Date: 05/10/2011
Nr Instances: 2
Nr Exposed: 1
Abatement Date: 05/13/2011
Gravity: 05
Report ID: 0729700
Contest Date: 06/01/2011
Final Order: 07/23/2012
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/23/2012 | 05/13/2011 | Serious | ||
| Penalty | Z: Issued | 05/10/2011 | 05/13/2011 | Serious |
Text For Citation: 01 Item/Group: 010B Hazard: CHEMNEP
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasion: Employees in the following locations were exposed to electrical shock hazards in that electrical wiring was not protected from abrasions when entering cabinets: a) Pen Yard - an energized wire connected at the scale house and leading to the lift station was unprotected from abrasion when entering into the top opening of the electrical box. b) Oil Building - a flexible cord attached to a battery charger ran through the side of a metal locker cabinet. 29 CFR 1903.19(c)(2) abatement of the above violation was verified at the time of inspection. No certification is required.