Violation Detail
Standard Cited: 19100219 E03 I Mechanical power-transmission apparatus.
Inspection Nr: 1769330.015
Citation: 01010B
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/10/2025
Nr Instances: 3
Nr Exposed: 12
Abatement Date:
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 03/05/2025
Related Event Code (REC): C
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 03/05/2025 | $0.00 | Other | ||
Penalty | Z: Issued | 02/10/2025 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 010B Hazard:
29 CFR 1910.219(e)(3)(i):Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section. a. On or about September 24, 2024, employees were exposed to caught-in hazards of the vertical belt, located on the right side on the front of #5 Calender, while performing activities such as startup/threading, frosting, and cleaning the rolls with stearic acid. The employer did not ensure the vertical belt, located at a height of approximately 36 inches from the floor, was guarded. b. On or about September 24, 2024, employees were exposed to caught-in hazards of the vertical belt, located on the left side on the front of #5 Calender, while performing activities such as startup/threading, frosting, and cleaning the rolls with stearic acid. The employer did not ensure the vertical belt, located at a height of approximately 36 inches from the floor, was guarded. c. On or about September 24, 2024, employees were exposed to caught-in hazards of the inclined belt, located on the left side on the front of #7 Calender, while performing activities such as startup/threading, frosting, cleaning the rolls with stearic acid. The employer did not ensure the inclined belt, located at a height of approximately 70 inches from the floor, was guarded.