Text For Citation: 01 Item/Group: 010B Hazard:

29 CFR 1910.146(k)(3): To facilitate non-entry rescue, retrieval systems or methods shall be used whenever an authorized entrant enters a permit space, unless the retrieval equipment would increase the overall risk of entry or would not contribute to the rescue of the entrant. Retrieval systems shall meet the following requirements. 29 CFR 1910.146(k)(3)(i): Each authorized entrant shall use a chest or full body harness, with a retrieval line attached at the center of the entrant's back near shoulder level, above the entrant's head, or at another point which the employer can establish presents a profile small enough for the successful removal of the entrant. Wristlets may be used in lieu of the chest or full body harness if the employer can demonstrate that the use of a chest or full body harness is infeasible or creates a greater hazard and that the use of wristlets is the safest and most effective alternative. (a): On or about September 12, 2022, the employer did not ensure that employees utilize chest or full body harness with a retrieval line attached when they entered the N33 Nitrider furnace for repairs. (b): On or about November 22, 2022, the employer did not ensure that employees utilize chest or full body harness with a retrieval line attached when they entered the N33 Nitrider furnace to retrieve product. (c) On or about November 26, 2022, the employer did not ensure that employees utilize chest or full body harness with a retrieval line attached when they entered the N8 Nitrider pit to deliver or retrieve fixtures. (d) On or about December 16, 2022, the employer did not ensure that employees utilize chest or full body harness with a retrieval line attached when they entered the "Super 2" furnace to conduct alloy repairs. Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(d).