Translate
Violation Detail
Standard Cited: 19100134 F02 Respiratory Protection.
Inspection Nr: 1068975.015
Citation: 01010B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/04/2015
Nr Instances: 5
Nr Exposed: 22
Abatement Date: 12/31/2015
Gravity: 10
Report ID: 0524500
Contest Date: 12/22/2015
Final Order: 06/30/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 06/30/2016 | $0.00 | 12/31/2015 | Serious | |
| Penalty | C: Contested | 01/07/2016 | $0.00 | 12/31/2015 | Serious | |
| Penalty | Z: Issued | 12/04/2015 | $0.00 | 12/31/2015 | Serious |
Text For Citation: 01 Item/Group: 010B Hazard:
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting face piece respirators were not fit tested prior to initial use of the respirator: Employees wore respirators to perform different activities throughout the facility and fit tests had not been provided before the employee was required to use the respirator in the workplace, including the following: (a) Employees engaged in aiding the sandblaster wore 3M-7502 half face respirators during sandblasting activities. (b) Employees engaged in sanding for body repair activities wore 3M-7502 half face respirators. (c) Employees engaged in spray painting activities wore 3M full face respirators while applying isocyanate-containing spray paint to vehicles. (d) Employees engaged in torch cutting for vehicle fabrication wore 3M-7502 half face respirators.