Translate
Violation Detail
Standard Cited: 19100305 B02 I Wiring methods, components, and equipment for general use.
Inspection Nr: 983919.015
Citation: 01010
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $3,300.00
Current Penalty: $2,310.00
Issuance Date: 12/30/2014
Nr Instances: 2
Nr Exposed: 2
Abatement Date: 01/06/2015
Gravity: 1
Report ID: 0626600
Contest Date: 01/08/2015
Final Order: 08/24/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 08/24/2015 | $2,310.00 | 01/06/2015 | Serious | |
| Penalty | C: Contested | 01/08/2015 | $3,300.00 | 01/06/2015 | Serious | |
| Penalty | Z: Issued | 12/30/2014 | $3,300.00 | 01/06/2015 | Serious |
Text For Citation: 01 Item/Group: 010 Hazard:
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: The employer does not provide all electrical fittings with covers. a. This violation was observed on or about July 2, 2014, in Mill 1 break room near the northeast corner, where employees were exposed to an electrical hazard while walking and sitting near and utilizing a wall electrical outlet without the outlet box being covered b. This violation was observed on or about July 2, 2014, in Mill 1 break room behind the Powerade vending machine where employees were exposed to an electrical hazard when operating the machine without the outlet box being covered. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all pull boxes, junction boxes, and fittings are provided with covers.