Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1576738.015
Citation: 01010
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,052.00
Current Penalty: $4,099.33
Issuance Date: 05/16/2022
Nr Instances: 5
Nr Exposed: 10
Abatement Date: 06/27/2022
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 06/09/2022
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/09/2022 | $4,099.33 | 06/27/2022 | Serious | |
| Penalty | Z: Issued | 05/16/2022 | $13,052.00 | 06/27/2022 | Serious |
Text For Citation: 01 Item/Group: 010 Hazard:
29 CFR 1910.305(g)(2)(iii):Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. On or before 2/7/22 the employer did not ensure that power supply cords that supplied power to the machines on the workshop floor had the required strain relief to prevent from damaging the cords and exposing live wires, therefore exposing employees to a shock hazard. The power supply cords located on machines such as: a) On or about 2/3/22 the employer did not ensure that the power supply cord for the Furnas pipe bender (model #150) had the proper strain relief in order to prevent damage to the cord, therefore exposing employees to a shock hazard from damaged power supply cords. b) On or about 1/17/22 the employer did not ensure that the power supply cord for the Havir Press #2 (model # SE 3963) had the proper strain relief in order to prevent damage to the cord, therefore exposing employees to a shock hazard from damaged power supply cords. c) On or about 1/7/22 the employer did not ensure that the power supply cord for the Alpha Allen full rev. power press (model # BT12) had the proper strain relief in order to prevent damage to the cord, therefore exposing employees to a shock hazard from damaged power supply cords.