Translate
Violation Detail
Standard Cited: 19100305 B02 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1524699.015
Citation: 01010
Citation Type: Serious
Abatement Status: Not Completed - Worksite Changed
Initial Penalty: $3,862.00
Current Penalty: $1,900.00
Issuance Date: 09/28/2021
Nr Instances: 5
Nr Exposed: 4
Abatement Date: 07/31/2024
Gravity: 5
Report ID: 0316700
Contest Date: 01/27/2022
Final Order: 07/30/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/30/2023 | $1,900.00 | 07/31/2024 | Serious | |
| Penalty | C: Contested | 02/04/2022 | $3,862.00 | 10/25/2021 | Serious | |
| Penalty | Z: Issued | 09/28/2021 | $3,862.00 | 10/25/2021 | Serious |
Text For Citation: 01 Item/Group: 010 Hazard:
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose. Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: (a) Upper Building, South Wall at Building's Western End - A duplex receptacle outlet box, above the work station with the DeWalt portable reciprocating saw, had no cover, exposing employees to an electrical hazard, on or about April 12, 2021. (b) Upper Building, near the Air Compressor - A duplex receptacle outlet box, powering a radio, had no cover, exposing employees to an electrical hazard, on or about April 12, 2021. (c) Lower Building, South Wall - The duplex receptacle outlet box at the DeWalt 10-inch compound miter saw had duct tape as a cover rather than having a cover approved for the purpose, exposing employees to an electrical hazard, on or about the week of April 5, 2021. (d) Lower Building, North Wall - The receptacle box at the DeWalt 10-inch compound miter saw had a piece of cardboard as a cover rather than having a cover approved for the purpose, exposing employees to an electrical hazard, on or about the week of April 5, 2021. (e) Lower Building, Room at the Building's West End - A junction box containing live wiring, on the north wall at the northeast corner of the room, had no cover, exposing employees to electrical hazards, on or about April 12, 2021. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.