Translate
Violation Detail
Standard Cited: 19100305 B02 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1390789.015
Citation: 01010
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $13,127.00
Current Penalty: $9,188.90
Issuance Date: 09/25/2019
Nr Instances: 1
Nr Exposed: 3
Abatement Date:
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 10/17/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/17/2019 | $9,188.90 | Serious | ||
| Penalty | Z: Issued | 09/25/2019 | $13,127.00 | Serious |
Text For Citation: 01 Item/Group: 010 Hazard:
29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear. a. On or about May 7, 2019, Shake-Out department employees were exposed to live electric parts due to the damaged electrical junction box for the Shake-Out Table electrical power supply located on a structural steel beam at the aisleway just east of the Shaker Table. The hinged cover for the enclosure was damaged and unable to close. Due to this condition, employees operating the Shaker Table controls which were located 3-4 inches below the open live parts were exposed to an electrical contact hazard.