Translate
Violation Detail
Standard Cited: 19100303 F02 General.
Inspection Nr: 1074197.015
Citation: 01010
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,900.00
Current Penalty: $5,500.00
Issuance Date: 12/14/2015
Nr Instances: 34
Nr Exposed: 14
Abatement Date: 01/16/2016
Gravity: 10
Report ID: 0728500
Contest Date:
Final Order: 01/13/2016
Related Event Code (REC):
Emphasis:
Substance: 8870
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/13/2016 | $5,500.00 | 01/16/2016 | Serious | |
| Penalty | Z: Issued | 12/14/2015 | $4,900.00 | 01/16/2016 | Serious |
Text For Citation: 01 Item/Group: 010 Hazard:
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a) Buske Logistics, Inc. is failing to protect employees by legibly marking breakers and disconnects to indicate their purpose. This was most recently documented in the following instances: (1) On or about July 8, 2015 had breakers in electrical panels that were not marked to indicate the purpose of the disconnecting means which could prevent the correct breaker being located and the correct circuit isolated. In Breaker Panel H1 the following breakers were switched to the on position and were not identified as to the purpose of the disconnecting means: 1. Breaker #13 not identified 2. Breaker #14 not identified 3. Breaker #15 not identified 4. Breaker #16 not identified 5. Breaker #17 not identified 6. Breaker #18 not identified 7. Breaker #19 not identified 8. Breaker #20 not identified 9. Breaker #21 not identified 10. Breaker #22 not identified 11. Breaker #23 not identified 12. Breaker #24 not identified 13. Breaker #25 not identified 14. Breaker #26 not identified 15. Breaker #27 not identified 16. Breaker #28 not identified 17. Breaker #29 not identified 18. Breaker #30 not identified In Breaker Panel identified as the Repack Panel the following breakers were switched to the on position and were not identified as to the purpose of the disconnecting means: 19. Breaker #9 not identified 20. Breaker #10 not identified 21. Breaker #11 not identified 22. Breaker #12 not identified 23. Breaker #13 not identified 24. Breaker #14 not identified 25. Breaker #15 not identified 26. Breaker #16 not identified 27. Breaker #17 not identified 28. Breaker #18 not identified 29. Breaker #19 not identified 30. Breaker #22 not identified 31. Breaker #23 not identified 32. Breaker #24 not identified 33. Breaker #25 not identified 34. Breaker #26 not identified Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.