Translate
Violation Detail
Standard Cited: 19100213 L02 Woodworking machinery requirements.
Inspection Nr: 1642218.015
Citation: 01009C
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $7,813.00
Current Penalty: $0.00
Issuance Date: 06/08/2023
Nr Instances: 2
Nr Exposed: 5
Abatement Date:
Gravity: 5
Report ID: 0521100
Contest Date: 07/03/2023
Final Order: 10/30/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/30/2023 | $0.00 | Serious | ||
| Penalty | C: Contested | 07/06/2023 | $7,813.00 | Serious | ||
| Penalty | Z: Issued | 06/08/2023 | $7,813.00 | Serious |
Text For Citation: 01 Item/Group: 009C Hazard:
29 CFR 1910.213(l)(2): Boring bits should be provided with a guard that will enclose all portions of the bit and chuck above the material being worked. At an establishment located at 200 Woodland Drive in Random Lake, Wisconsin: a) On or about December 20, 2022, to January 6, 2023, the boring bit on the Sicotte Horizontal Boring Machine (Model: J-20, S/N: 904) was not guarded to prevent employee exposure to the entanglement and amputation hazards created by the bit and chuck above the material being worked. b) On or about January 5, 2023, the hollow chisel mortising bit on the Northtech Mortise Machine #197 (Model: MS-25A, S/N: 1743) was not guarded to prevent employee exposure to the amputation hazard created by the bit during operation.